LSR Topcoat HE Vacuümpomp Silicone that is too cold

Silicone that is too cold also gives a less good result because the foam formation starts to collapse again

precise reproductions

component B is a liquid red-brown fluid of 800 mPa·s

textile and fiber auxiliaries

LSR Topcoat HE Vacuümpomp Silicone that is too coldThis silicone coating is applied to cured silicone to mattify and reduce friction. LSR Top Coat HE is a two component translucent matt coating with high elongation for spraying technology. It has been developed as an abrasion resistant coating for printed silicone elastomer substrates based on LSR. Surfaces to be coated must be free from dust and grease but do not require further pre treatment. LSR Top Coat HE will vulcanise quickly by heat treatment